Chesapeake Bay Coatings - Item # MIL-DTL-53039, Aircraft Black Moisture Cure CARC Camouflage
Call Us: 800.866.6470 | E-mail:
info@chesapeakebaycoatings.com
Home
|
About Us
|
Products
|
Request Quote
|
Contact Us
Search Catalog:
By Part Number
By Keyword
Use trailing wildcard (*) for broader results.
» Mil-Spec Coatings
» Masonary & Steel
Coating
» Truck Body Paint
» Pool Paint
» Yacht Paint
» Reducer and Solvents
|
Shipping
|
Tax
|
Terms
Shopping Cart
0 items
Request for Quote
0 items
All Categories
>
Mil-Spec Coatings
>
CARC Coatings
>
CARC Coatings
>
Item # MIL-DTL-53039
Item # MIL-DTL-53039 Aircraft Black Moisture Cure CARC Camouflage
QUOTE
Printable Page
Email This Page
Save To Favorites
Aircraft Black Moisture Cure CARC Camouflage
An Aliphatic 1K haps free Chemical Agent Resistant coating meeting MIL-C-53039A
Intended uses provides visual and infrared camouflage to military vehicles and equipment. Resistant to chemical warfare agents and decontaminating materials.
Caution :
This product is intended for industrial use only
Specifications
·
Application Information
·
Surface Preparation
·
Safety Information
·
Storage
·
Dry Time / Cure
·
Note
Specifications
Mil-Spec Number
MIL-DTL-53039
Color
Aircraft Black 37038 Fed Std 595 Number
Max. Gloss @ 85 degrees
3.5
Volume Solids
51.4 %
Weight Solids
67.3 %
Max. VOC
3.5 lb/gal
Min. Film Thickness DFT
1.8 mils
Theoretical Coverage @ 1 Mil Dry
824 ft²
Weatherometer Test
Pass Xenon Arc 300 hrs
Viscosity
65 - 70 KU
Weight per Gallon
10.4 lb/gal
Specification
MIL-C-53039A Amend 2
Manufacturer Part Number
N-8507
Application Information
Methods:
Conventional spray, HVLP, airless, AAA
Mix ratio:
Single component (1K).
Reducer:
None. Ready to spray. Special thinning with T-210 (MIL-T-81772B), its equivalent or Urethane grade thinner. Use of thinner will affect VOC and may cause paint to sag and run. PCBTF (Oxsol 100) may be used up to 20 % without affecting VOC.
Cleaner:
T-210 or Urethane grade thinner
Shelf life:
12 months in unopened container. Use within 8 hours after opening or see MIL-DTL-53072C for further info.
Dry time:
30 min to touch, dry hard 3 hours (max.), dry through 4 hours (max.) 77°F, 50% RH
Time to recoat:
Minimum: Flash dry between coats. No maximum recoat time for clean surfaces. Scuff sand and clean if needed.
Primers:
M1L-P-23377, MIL-P-53022, M1L-P-53030, or MIL-P-85582.
Surface Preparation
Surface should be clean of all grease, dirt, oil, rust and foreign material. See MIL-DTL-53072C for application guidance.
Safety Information
Consult the Material Safety Data Sheet prior to application for detailed information on the health and safety hazards.
Storage
This product must be stored in accordance with Local, State, and National Regulations.
Preferred storage conditions:
Indoors
Keep containers in a dry space with adequate ventilation
The containers must be tightly sealed
Handle with care
Shake well before use
Shelf life is 12 months from date of manufacture
Dry Time / Cure
May be force dried 20 minutes at 150°F (dry hard). Air dry times double for every 10° drop in temperature (approximate). Low humidity or high film thickness will also slow dry and cure time.
Note
The information is supplied as a guideline to our customers. The user must be aware of the cleaning, pretreatment, application and testing requirements for their specific job.
Site created by
ThomasNet Web Solutions
» Mil-Spec Coatings » Masonary & Steel
